Ricoh FT2012+ Скачать руководство пользователя

Страница: 79 / 88

❐

If you make copies continuously under high temperature, the copier stops
copying for a while — there is no problem.

❐

When you replace the imaging unit
and close the top unit, push the
top of the copier with both hands
as shown in the illustration.

❐

While copying, do not turn off the main switch.

❐

While copying, do not open the top unit.

❐

While copying, do not lift the platen cover.

❐

While copying, do not unplug the power cord.

❐

Do not lay anything weighing more than 10 kg, 22 lb on the exposure glass.

❐

Do not place tools or other hard objects on the exposure glass.

❐

Do not allow paper clips, staples, or other small metallic objects to fall inside
the machine.

❐

Always turn the copier off when you have finished copying.

When adding toner

❐

Before setting the new toner bottle, shake it well, at least 5 or 6 times.

❐

Do not remove the toner bottle before the Add Toner

indicator is on —,

toner could spill out.

❐

Do not store toner where it will be exposed to heat.

❐

Do not eat or swallow toner, and keep it out of reach of children.

When removing misfed paper

❐

Do not leave any torn scraps within the copier.

❐

After clearing misfeeds, make sure that all units are returned to their original
positions and all covers are closed.

❐

Do not touch the copy image when removing misfed paper — toner may
stain your hands.

DO’S AND DON’TS

Содержание FT2012+

























































































Результаты поиска

Содержание FT2012+

Отзывы:

Похожие инструкции для FT2012+

Бренды по названию

Популярные бренды

Ricoh FT2012+, Руководство по эксплуатации

Результаты поиска

Содержание FT2012+

Отзывы:

Похожие инструкции для FT2012+

Бренды по названию

Популярные бренды