Ricoh FAX3310LE, Руководство по эксплуатации

Страница: 10 / 88

6
Even though the operation panel display goes out in Energy Saving mode, Indi-
cators that flash or light during communication or reception still work. When the
Receive File indicator lights, exit Energy Saving mode and take the appropriate
action.
You can turn Energy Saving mode on or off with User Parameter. When the ma-
chine is shipped, Energy Saving Standby is selected on.
The machine enters Energy Saving mode when:
• Nobody uses the machine for about 5 minutes (the machine automatically en-
ters Energy Saving mode)
• The user holds down the Energy Saver key for about 2 seconds.
To exit Energy Saving mode:
• In Energy Saving Standby mode, press the Energy Saver key.
• In FAX Standby mode, press any key.
• Set a document.
• Pick up the optional handset or the external telephone handset.
Note
❒
When you load paper in Energy Saving mode, no error will be displayed even
if the cassette is not pushed right in.
❒
After loading paper, press the Energy Saver key and check that "READY” is
shown on the display.
The Manual Receive indicator goes out in Energy Saving mode even if Manual
Receive is turned on.
Reception in Energy Saving mode
In Energy Saving mode, documents that have been stored in memory are still
sent and the machine can still receive messages.
When a message is received in Energy Saving mode, the machine prints it and
returns to Energy Saving mode.
Energy Saving
Mode Type Status How long before
you can print after
exiting Energy Sav-
ing mode Power con-
sumption
Fax Standby Display turns off
The machine maintains the heating
roller temperature at half the full tem-
perature; warm up takes less time.
(Heater half cool) Within about 30 sec-
onds 40W
Energy Saving
Standby Display turns off
The machine lets the heating roller cool
to room temperature; warm-up takes
longer.(Heater off)
Within about 40 sec-
onds 1.5W
StellaF15_GB_Combine_F2_pre_FM.book Page 6 Thursday, June 24, 2004 2:32 PM