Ricoh DDP 92, Руководство по установке, Страница: 78 / 118

Installation 4-35
II L 01
4) Connect the FNS IF cable (4 pin white connector) coming from the Container Stacker 2 to
the 4 pin white connector in the Finisher (Connection 1 on the below figure).
5) Connect the FNS IF cable (20 pin black connector) coming from the Container Stacker 2 to
the CN7 connector on the Finisher main P/K (Connection 2 on the below figure).
6) Turn on the No. 5 and 8 and turn off the No. 2 of the SW1 mounted on the CPXXX P/K of the
Engine.
Turn on the “H” of the SW1 mounted on the P/K of the Finisher(FS-108R).
(RoHs Compliance Unit)
[Note] Put the cable through the opening “A” of the Container Stacker 2 for connection.
7) Install the Rear Covers of the Printer, Container Stacker 2 and Finisher.
Opening “A”
Printer
Container Stacker 2
(W/ Through path)
Standard Finisher
AF cable Connection 2
(20 pin black)
Connection 1
(4 pin white) Disconnection 1
(4 pin white)
Disconnection 2
(2 pin white)
[FS-108R] (RoHS Compliance Unit)
H
L
SW1