Ricoh D3GF Скачать руководство пользователя страница 120

Страница: 120 / 187

4.System Maintenance

114

The Fiery controller will reboot as necessary between exclusive patches.

(If five patches are being installed, then up to five reboots may occur).



After the E-25C reboots, Command WorkStation will not automatically reconnect. The

Administrator must click Connect in order to reconnect to the E-25C.



While your PC is reconnected to the E-25C with Command WorkStation, if the update is still in

progress, you may observe the below message on the Command WorkStation screen.



Do not operate the Command WorkStation until this message disappears.

History

After the system reboots automatically for a number of times necessary according to the updates

installed, reconnect to your Fiery controller via Command WorkStation and confirm the update history in

the History menu.

Содержание D3GF




























































































































































































Результаты поиска

Содержание D3GF

Отзывы:

Ricoh D3GF, Руководство по обслуживанию на месте, Страница: 120 / 187

Результаты поиска

Содержание D3GF

Отзывы: