Ricoh D127, Руководство по обслуживанию на месте

Страница: 415 / 474

1
Output from Attached Document at E-mail TX Error
This setting determines whether only the first page or all pages of an e-mail attachment are
printed at the sending station when a transmission error occurs. This allows the customer to see
which documents have not reached their intended destinations if sent to the wrong e-mail
addresses, for example.
0: Prints 1st page only.
1: Prints all pages.
2-3
Text String for Return Receipt
This setting determines the text string output for the Return Receipt that confirms the transmission
was received normally at the destination.
00: “Dispatched”
Sends from PC mail a request for a Return Receipt. Receives the Return Receipt with
“dispatched” in the 2nd part:
Disposition: Automatic-action/MDN-send automatically; dispatched
The “dispatched” string is included in the Subject string.
01: “Displayed”
Sends from PC mail a request for a Return Receipt. Receives the Return Receipt with
“displayed” in the 2nd part:
Disposition: Automatic-action/MDN-send automatically; displayed
The “displayed” string is included in the Subject string.
10: Reserved
11: Reserved
A mail requesting a Return Receipt sent from an IFAX with this switch set to “00” (for
“dispatched”) received by Microsoft Outlook 2000 may cause an error. If any setting other
than “displayed” (01) causes a problem, change the setting to “01” to enable normal sending
of the Return Receipt.
4
Media accept feature
This setting adds or does not add the media accept feature to the answer mail to confirm a
reception.
0: Does not add the media accept feature to the answer mail
1: Adds the media accept feature to the answer mail.
Use this bit switch if a problem occurs when the machine receives an answer mail, which
contains the media accept feature field.
Bit Switches
207