Ricoh D124 Скачать руководство пользователя

Страница: 136 / 177

D124

130

Detailed Descriptions

6.8.4 MANUAL PRINT HEAD CLEANING AND FLUSHING

The operator can use the User Tools to clean and flush the print heads whenever a

problem with printing occurs.



Every execution of print head cleaning and flushing is recorded in NVRAM by a

counter (0 to 999999).



This is done so that the service technician can keep track of how many times the

operator is cleaning and flushing the print heads with SP7212 (User Cleaning) and

SP7213 (User Refreshing).



Humidity can affect the number of times the print heads require cleaning and

refreshing.



For more details about manual print head cleaning and refreshing, refer to the

Operating Instructions or the Field Service Manual.

6.8.5 AUTOMATIC DOWNTIME CLEANING

Ink can thicken or dry around the nozzles if the print heads remains idle for a long

time, especially at low temperatures. This can affect the quality of printing. To prevent

the drying or thickening of ink around the nozzles, the machine will execute a

maintenance cleaning cycle appropriate for the length of time that the print heads

have remained idle. This is done automatically without intervention by the operator.

The machine monitors two phases of downtime.



Idle time 1

: Starts after the last sheet exits and all the print heads are capped



Idle time 2

: Amount of time each head has remained idle

Idle (or downtime) refers to the length of time that a print head has not been used.

For example, If the machine is used for extensive black-and-white copying and

printing over a period of several days, a count of idle time for the color print heads

(C, YM) is maintained even though the machine has not been turned off.

These idle time counts are used to execute these operations:



Air purging (ink supply and purging, filling and cleaning, and air purging/filling

together)



Ink supply sequence



Cleanings and flushing (refreshing) done by the operator manually



Ink purging done after idle time

Содержание D124


















































































































































































Результаты поиска

Содержание D124

Отзывы:

Похожие инструкции для D124

Бренды по названию

Популярные бренды

Ricoh D124, Подробное описание устройства

Результаты поиска

Содержание D124

Отзывы:

Похожие инструкции для D124

Бренды по названию

Популярные бренды