Ricoh BOOKLET MAKER BK5010 Скачать руководство пользователя

Страница: 52 / 62

REMARKS

Maintaining Your Machines

never

attempt any maintenance function that is not specifically described in this

documentation.

The Feed rollers need to be cleaned regularly when in use, and if the unit has not been used

for a period of time. How often this should be done, depends on the paper type and print

quality.

An increasing number of misfeeds, or double feeds, is one indication of the need to clean

the Feed Rollers.

Remove the feed roller assembly by pressing it to the front of unit (A). The left end of the

feed roller assembly will now be released (B) and the assembly can be removed.

Clean the Feed rollers and the Paper separator pad with water and a clean lint free

cloth.

Cleaning feed rollers and paper separator pad

Cover Feeder

Paper separator pad

Feed rollers

Press toward front.

Lift out this

side

Showed with Top cover upper part

removed for clarity.

Содержание BOOKLET MAKER BK5010































































Результаты поиска

Содержание BOOKLET MAKER BK5010

Отзывы:

Похожие инструкции для BOOKLET MAKER BK5010

Бренды по названию

Популярные бренды

Ricoh BOOKLET MAKER BK5010, Руководство по эксплуатации

Результаты поиска

Содержание BOOKLET MAKER BK5010

Отзывы:

Похожие инструкции для BOOKLET MAKER BK5010

Бренды по названию

Популярные бренды