Ricoh BOOKLET MAKER BK5010 Скачать руководство пользователя | Manualshive

Страница: 45 / 62

background image

6

45

Booklet maker fault codes

Check staples

Cover feeder fault codes

Misfeed

Trimmer fault codes

Trim bin full

Double feed

This message will be displayed when the trim bin is full or when a trim strip, due to static

electricity, is prevented from falling down into the trim bin. Empty the trim bin and remove loose

trim strips from inside the Trimmer. See section 1. Basics for how to remove the trim bin.

This message will be displayed when a staple cartridge is empty or when stapling could not

be performed. Check in the following order:

– If a staple cartridge is empty, replace according to section 1. Basics.

– If staple cartridges are OK; remove the set and check that the number of sheets is within

specifications.

– If staple cartridges are OK and set is within specifications; remove and check stapler head

according to section 1. Basics.

This message will be displayed when the Cover feeder could not feed a cover from the paper

bin. Check cover loading according to section 2. Making Booklets. If problem persists, clean

separator pad according to section 7. REMARKS.

This message will be displayed when the Cover Feeder detects that more than one cover

was fed from the cover bin. If more than one cover was fed, check cover loading according to

section 2. Making Booklets. If the covers that are fed are thick, with dark print or with mixed

prints on the covers, double feeding may be displayed even if that is not the case. Turn off

double sheet detection according to section 3. Tools.

Set too thick

This message will be displayed when the set sent from the copier is outside Booklet Maker

specifications. Open the top cover, remove the set and close the top cover.

«
...
43
44
45
46
47
...
»

Содержание BOOKLET MAKER BK5010































































Отзывы:

Нет отзывов

Похожие инструкции для BOOKLET MAKER BK5010

SCX-4300 - SCX 4300 B/W Laser

Бренд: Samsung Страницы: 4

ML-2240 - 23 Ppm Mono Laser Printer

Бренд: Samsung Страницы: 16

ML 2510 - B/W Laser Printer

Бренд: Samsung Страницы: 170

Бренд: Samsung Страницы: 165

Бренд: Xerox Страницы: 114

WorkCentre 7525

Бренд: Xerox Страницы: 70

WorkCentre 7525

Бренд: Xerox Страницы: 8

WorkCentre 7328

Бренд: Xerox Страницы: 24

WorkCentre 7232

Бренд: Xerox Страницы: 4

WorkCentre 7232

Бренд: Xerox Страницы: 24

WorkCentre 7232

Бренд: Xerox Страницы: 236

WorkCentre 7232

Бренд: Xerox Страницы: 128

WorkCentre 7232

Бренд: Xerox Страницы: 25

WorkCentre 7232

Бренд: Xerox Страницы: 8

WorkCentre 7228

Бренд: Xerox Страницы: 22

WorkCentre 7228

Бренд: Xerox Страницы: 300

WorkCentre 7300 Series

Бренд: Xerox Страницы: 128

WorkCentre 7132

Бренд: Xerox Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды