manualshive.com logo in svg

Ricoh BOOKLET MAKER BK5010, Руководство по эксплуатации

Поделиться
Скачать
Ricoh BOOKLET MAKER BK5010 Скачать руководство пользователя страница 50

7

50

Where to put Your Machine

Machine environment

Power connection

REMARKS

• 

Always

 connect the equipment to a properly grounded power source. If in    

 

 

doubt, have the power source checked by a qualified electrician.

• 

WARnInG: 

Improper grounding of the equipment can result in electrical shock.

• 

never

 connect the machine to a power source that lacks a ground connection  

 

 

terminal.

•  Always locate the equipment on a solid support surface with adequate strength for the  

 

weight of the machine.

•  Always keep magnets and all devices with strong magnetic fields away from the  

 

 

machine.

If the place of installation is air-conditioned or heated, do not place the machine where it

will be:

• 

Subjected to sudden temperature changes.

• 

Directly exposed to cool air from air-conditioner.

• 

Directly exposed to heat from heater.

Содержание BOOKLET MAKER BK5010































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды