Ricoh Be-C2, Техническое учебное пособие

Страница: 69 / 282

To send the machine from the factory, the blade is away from the drum.
After Drum Set Mode, move the blade until it touches the drum (move the
lever right), where it will stay during standard operation.
The first time that the drum turns, the layer applied during Drum Set Mode
will be cleaned off. This layer will lubricate the edge of the cleaning blade,
and this makes sure that the blade will not bend in the wrong direction when
the drum turns.
If you move the machine a short distance within the same room, it is not
necessary to move the cleaning blade back to the transportation position.
But, after installation, if you move it a long distance (for example, between a
warehouse and the customer location), move the blade to the transportation
position.
68