Ricoh B804, Руководство по обслуживанию на месте

Страница: 63 / 82

4:
The jogger fences remain 1 mm away from the sides of the stack. The feed out belt [1] raises the stack until
the top of the stack is 10 mm past the leading edge pressure roller [2] and stops. The leading edge pressure
roller descends and applies pressure to the top of the stack. The stack junction gate [3] (normally open)
closes. The pressure roller [4] and pressure plate [5] retract.
5:
The feed out belt [6], transport rollers [7], [8], and clamp rollers [9] rotate and feed the stack past the
closed stack junction, over the top and down toward the bottom fence [10]. At the same time, the fold unit
bottom fence descends from its home position and stops 10 mm below the fold position.
6:
The rollers feed the leading edge of the stack to within 3 mm of the stack stopper of the bottom fence [13].
The fold unit entrance sensor [11] detects the stack and opens the clamp rollers [12]. The stack drops 3
mm onto the fold unit bottom fence [13]. At this time, the first sheet [14] of the next stack feeds to the stapling
tray.
Booklet Stapling (B804 Only)
61
2