Ricoh B022, Руководство по обслуживанию, Страница: 563 / 878

Prin
te
r/
S
c
a
nne
r
Contr
o
lle
rs
B453/
B46
1
SCANNER SERVICE MODE
SM 3-3 B453/B461
3.3 SCANNER SERVICE MODE
3.3.1 SCANNER PROGRAM MODE TABLE
Service Table Key
Notation What it means
[range / default /
step] Example: [-9 ~ +9 / +3.0 / 0.1 mm step]. The setting can be
adjusted in the range
±
9, value reset to +3.0 after an NVRAM
reset, and the value can be changed in 0.1 mm steps with each
key press.
italics Comments added for your reference.
* This value is stored in NVRAM. After a RAM reset, the default
value (factory setting) is restored.
DFU Denotes “Design or Factory Use”. Do not change this value
SP1 Mode Number Function and [Setting]
1 Model Name Displays the model name.
2 Scanner Firmware
Version Displays the scanner firmware version.
3 Scanner Firmware
Number Displays the firmware’s part number.
1001
4 Detail Model Name Displays the detail model name.
1002 Error Log Display Displays the error log data.
1003* FTP Port Number Changes the FTP port number.
After changing this value, do the following:
1. Run the Registry Editor
2. Access
/HKEY_LOCAL_MACHINE/SOFTWARE/
Ricoh/NetworkScanner
3.
Change the value of ‘PortNo’ to this SP
mode’s value
[0 – 65535 / 3670 / 1 step]
1004* Compression Type Selects the compression type for binary picture
processing.
[1: MH, 2: MR, 3: MMR]
1005* Erase Margin Creates an erase margin for all edges of the
scanned image.
If the machine has scanned the edge of the
original, create a margin.
[0 – 5 / 0mm / 1mm step]
1006* Auto Reset Timer Adjusts the auto reset timer for the scanner
function.
If this is “0”, the auto reset function is disabled.
[0, 10 – 99 / 60s / 1s step]