Ricoh Aficio SP 320 Series, Руководство пользователя

Страница: 121 / 272

There are three image density levels. The darker the density level, the darker the printout.
1. Press the [Density] key.
CVW109
2. Press the [ ] or [ ] key to select the desired density level, and then press the [OK] key.
• Press the [Escape] key to discard the current change and return to the initial screen.
• You can change the machine's default [Density] setting to always scan with a specific density level.
For [Density], see page 140 "Fax Transmission Features Settings".
• Temporary job settings are cleared in the following cases:
• When no input is received for the period of time specified in [System Auto Reset Timer] while
the initial screen is displayed. For [System Auto Reset Timer], see page 166 "Administrator
Settings".
• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.
Specifying the resolution
This section describes how to specify the scan resolution for the current job.
There are three resolution settings:
Standard
Select this when the original is a printed or typewritten document with normal-sized characters.
Detail
Select this when the original is a document with small print.
Photo
Select this when the original contains images such as photographs or shaded drawings.
Sending a Fax
119