Ricoh Aficio SP 1200, Обучение по обслуживанию

Страница: 23 / 62

23
Ricoh Co. Ltd.
http://www.ricoh.com/
Service Maintenance Mode – 2
‰
After entering Service Mode, press the SW supporter twice to select
service mode set 2 (table below).
Š
Confirm that the Toner, Drum, and Error LEDs light.
‰
Press the SW supporter from 1 to 5 or 7 times to select a maintenance
function or mode as shown by the following table.
Back to normal state Eight times or more
21) Developer Roller Counter Reset 2 (For
standard toner cartridge)* Seven times
Not used (Do not select, will cause counter error.) Six times
20) Developer Roller Counter Reset 1 (For starter
toner cartridge)* Five times
19) Sleep Mode Setting (Off/On)* Four times
18) Sleep Mode Indication (Off/Dimmed) Three times
17) Printer Settings Twice
16) Printing for Maintenance Once
Resulting Function/Mode Press SW Supporter
Service Mode Set 2
‰
Refer to the FSM for details about the individual functions or modes.
*All LEDs should light for one second.
No additional notes.