Ricoh Aficio SP 1200, Обучение по обслуживанию

Страница: 22 / 62

22
Ricoh Co. Ltd.
http://www.ricoh.com/
Service Maintenance Mode – 1
‰
After entering Service Mode, press the SW supporter once to select
service mode set 1 (table below).
Š
Confirm that the Toner, Drum, and Error LEDs light.
‰
Press the SW supporter from 1 to 7 times to select a maintenance
function or mode as shown by the following table.
Back to normal state Eight times or more
15) Paper Size Setting (A4/Letter) Seven times
14) QA Test Print Six times
13) RAM Check Five times
12) NV-RAM Value Dump Mode Four times
11) Fixing Unit Test Print Three times
10) Continuous Grid Pattern Print Mode Twice
9) Factory Inspection Mode Once
Resulting Function/Mode Press SW Supporter
Service Mode Set 1
‰
Refer to the FSM for details about the individual functions or modes.
No additional notes.