T
echnical
B
ulletin
PAGE: 1/1
Model:
GR-C1
Date:
27-Jun-12
No.:
RD117028
Subject:
Fusing Thermistor
Prepared
by:
K. Moriizumi
From:
3rd Tech Service Sect., MFP/P Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety
Other ( )
Tier 2
Important Information about Replacing the Fusing Thermistor
!
The
AW10014
9
fusing thermistor is marked with a
pink
dot. When you replace the
thermistor, make sure that this pink dot faces the bracket, as shown in the photos
below. (The dot is visible through the bracket after you attach it).
!
Currently, this thermistor cannot be supplied. If you need to replace the fusing
thermistor, use the AW10014
7
thermistor instead. It is the same thermistor.
IMPORTANT:
The AW10014
7
thermistor is not marked with a pink dot, so make sure
that the side of thermistor that covers the harnesses (shown in the
right side of the photo)
faces the bracket.
Pink dot on AW10014
9
:
Pink dot visible after attachment of AW10014
9
:
