Ricoh Aficio MP 2550B, Руководство по обслуживанию

Страница: 756 / 1153

Error Codes
D361 22 SM
Code Meaning Suggested Cause/Action
6-10
G3 ECM - error frames
still received at the other
end after all
communication attempts
at 2400 bps
ƒ Check for line noise.
ƒ Adjust the tx level (use NCU parameter 01 or
the dedicated tx parameter for that address).
ƒ Check the line connection.
ƒ Defective remote terminal.
6-21
V.21 flag detected during
high speed modem
communication
ƒ The other terminal may be defective or
incompatible.
6-22
The machine resets the
sequence because of an
abnormal handshake in
the V.34 control channel
ƒ Check for line noise.
ƒ If the same error occurs frequently, replace the
FCU.
ƒ Defective remote terminal.
6-99
V.21 signal not stopped
within 6 s
ƒ Replace the FCU.
13-17
SIP user name
registration error
ƒ Double registration of the SIP user name.
ƒ Capacity for user-name registration in the SIP
server is not sufficient.
13-18 SIP server access error
ƒ Incorrect initial setting for the SIP server.
ƒ Defective SIP server.
14-00 SMTP Send Error
Error occurred during sending to the SMTP server.
Occurs for any error other than 14-01 to 16. For
example, the mail address of the system
administrator is not registered.
14-01 SMTP Connection Failed
Failed to connect to the SMTP server (timeout)
because the server could not be found.
ƒ The PC is not ready to transfer files.
ƒ SMTP server not functioning correctly.
ƒ The DNS IP address is not registered.
ƒ Network not operating correctly.
ƒ Destination folder selection not correct.