Ricoh Aficio MP 2550B, Руководство по обслуживанию

Страница: 444 / 1153

SP8xxx: Data Log 2
D017/D018/D019/D020 5-180 SM
ƒ For example: When a copy job stored on the document server is printed in document
server mode, the appropriate L: counter (SP8076 0xx) increments.
ƒ Printing a fax report counts as a job and increments the F: counter (SP 8073).
ƒ Interrupted jobs (paper jam, etc.) are counted, even though they do not finish.
ƒ If a job is paused and re-started, it counts as one job.
ƒ If the finisher runs out of staples during a print and staple job, then the job is counted at
the time the error occurs.
ƒ For copy jobs (SP 8072) and scan jobs (SP 8075), the total is calculated by multiplying
the number of sets of copies by the number of pages scanned. (One duplex page
counts as 2.)
ƒ The first test print and subsequent test prints to adjust settings are added to the
number of pages of the copy job (SP 8072).
ƒ When printing the first page of a job from within the document server screen, the page
is counted.
T:FAX TX Jobs [0 to 9999999/ 0 / 1]
8111
These SPs count the total number of jobs (color or black-and-white)
sent by fax, either directly or using a file stored on the document server,
on a telephone line.
F:FAX TX Jobs [0 to 9999999/ 0 / 1]
8113
These SPs count the total number of jobs (color or black-and-white)
sent by fax directly on a telephone line.
ƒ
These counters count jobs, not pages.
ƒ
This SP counts fax jobs sent over a telephone line with a fax application, including
documents stored on the document server.
ƒ
If the mode is changed during the job, the job will count with the mode set when the job
started.
ƒ
If the same document is faxed to both a public fax line and an I-Fax at a destination
where both are available, then this counter increments, and the I-Fax counter (812x)
also increments.
ƒ
The fax job is counted when the job is scanned for sending, not when the job is sent.