Read This First
7
•
Before installing options, the machine should be turned off and unplugged
for at least an hour. Components inside the machine become very hot, and
can cause a burn if touched.
•
Before moving the machine, unplug the power cord from the outlet. If the
cable is unplugged abruptly, it could become damaged. Damaged plugs or
cables can cause an electrical or fire hazard.
•
When lifting the machine, use the grips on both sides. The machine could
break or cause an injury if dropped.
•
The printer weighs about 20 kg (44.1 lb.).When lifting the machine, use the
inset grips on both sides. Otherwise the printer could break or cause injury
if dropped.
•
Do not touch the inside of the controller board compartment. Doing so may
cause a malfunction or a burn.
•
The inside of this printer becomes very hot. Do not touch parts labelled “
v
”
(indicating a hot surface). Touching these parts will result in burns.
•
Grip the plug, not the cord, when pulling the plug from the socket. Pulling
the cord causes wear and tear that can result in fire or electric shock.
•
Lifting the paper feed unit carelessly or dropping it may cause injury.
•
When removing misfed paper, do not touch the fusing section because it
becomes very hot.
•
When you move the printer, remember to unplug the power cord from the
wall outlet to avoid a fire or an electric shock.
•
When you pull out the plug from the socket, grip the plug, not the cord, to
avoid damaging the cord and causing a fire or an electric shock.
•
When moving the printer after use, do not take out any of the Toners, Photo
Conductor Units, nor the Waste Toner Bottle to prevent toner spill inside the
machine.
