Read This First
5
•
Confirm the wall outlet is near the machine and freely accessible, so
that in the event of emergency, it can be unplugged easily.
•
Only connect the machine to the power source described in the man-
ual.
•
Avoid multi-wiring.
•
Do not damage, break or make any modifications to the power cord.
Do not place heavy objects on it, pull it hard or bend it more than nec-
essary. These actions could cause an electric shock or fire.
•
Do not incinerate spilled toner or used toner. Toner dust is flammable
and might ignite when exposed to an open flame.
•
Disposal should take place at an authorized dealer or an appropriate
collection site.
•
If you dispose of the used toner cartridges yourself, dispose of them
according to local regulations.
•
Do not store toner, used toner, or toner containers in a place with an
open flame. The toner might ignite and cause burns or a fire.
•
Plug and unplug the power cord with dry hands, or an electric shock
could occur.
•
Do not risk electric shock by handling the power cord or plug with wet
hands.
•
Do not remove any covers or screws other than those specified in this
manual. Some parts of the machine are at a high voltage and could
give you an electric shock. Also, if the machine has laser systems, di-
rect (or indirect) reflected eye contact with the laser beam may cause
serious eye damage. When the machine needs to be checked, adjust-
ed, or repaired, contact your service representative.
•
Do not take apart or attempt any modifications to this machine. There
is a risk of fire, electric shock, explosion or loss of sight. If the ma-
chine has laser systems, there is a risk of serious eye damage.
•
Be sure to turn off the power switch and wait for about 15 minutes be-
fore cleaning the Registration roller. Not waiting for the printer to cool
down can result in a burn.
•
Keep the machine away from flammable liquids, gases, and aerosols.
A fire or an electric shock might occur.
