Ricoh Aficio AP600LU, Руководство по эксплуатации

Страница: 47 / 52

4. Turn on the power of the printer.
Found New Hardware Wizard starts, and USB Printing Support is installed automatically.
5. Click [Devices and Printers].
6. Double-Click the icon of printer you want to use in the [Unspecified] category.
7. Click [Hardware] tab.
8. Click [Properties].
9. Click [General] tab.
10. Click [Change settings].
11. Click [Driver] tab.
12. Click [Update Driver...].
13. Click [Browse my computer for driver software].
14. Insert the CD-ROM into the CD-ROM drive.
If Auto Run starts, click [Cancel] and then click [Exit].
15. Click [Browse...], and then select the printer driver location.
If the CD-ROM drive is D, the source files of the printer driver are stored in the following locations:
• Windows 7
• D:\DRIVERS\PCL6\XP_VISTA\MUI\disk1
• Windows Server 2008 R2
• D:\DRIVERS\PCL6\x64\MUI\DISK1
The PCL6 printer driver will be installed in the language of the operating system.
16. Check the printer driver location, and then click [Next].
17. Click [Close].
If the installation is successful, the icon of the printer connected to the "USB001" port is added to the
[Devices and Printers] window.
• To disable Auto Run, press the left Shift key when inserting the CD-ROM into the drive and keep it
pressed until the computer finishes reading from the CD-ROM.
• The number after "USB" varies depending on the number of printers connected.
Installing the Printer Driver Using USB
45
3