Ricoh Aficio 6010 Скачать руководство пользователя страница 217

Страница: 217 / 282

201

Others

Where to Put Your Machine

Machine Environment

Your machine’s location should be carefully chosen because environmental conditions greatly affect its perfor-
mance.

Optimum environmental conditions

CAUTION:

• Keep the machine away from humidity and dust. A fire or an electric shock might occur.

• Do not place the machine on an unstable or tilted surface. If it topples over, it cause injury.

CAUTION:

• If you use the machine in a confined space, make sure there is a continuous air turnover.

❐

Temperature: 10 – 32°C, (50 – 89.6°F)(humidity to be 54% at 32°C, 86°F)

❐

Humidity: 15 – 80% (temperature to be 27°C, 80.6°F at 89.6%)

❐

A strong and level base.

❐

The machine must be level within 5mm, 0.2" both front to rear and left to right.

❐

To avoid possible built-up ozone, make sure to locate this machine in a large well ventilated room that has an air
turnover of more than 30m

/hr/person.

Environments to avoid

❐

Locations exposed to direct sunlight or strong light (more than 2,000 lux).

❐

Locations directly exposed to cool air from an air conditioner or heated air from a heater. (Sudden temperature changes
might cause condensation within the machine.)

❐

Places where the machine might be subjected to frequent strong vibration.

❐

Dusty areas.

❐

Areas with corrosive gases.

Where to Put Your Machine

Содержание Aficio 6010



























































































































































































































































































Результаты поиска

Содержание Aficio 6010

Отзывы:

Бренды по названию

Популярные бренды

Ricoh Aficio 6010, Руководство по эксплуатации

Результаты поиска

Содержание Aficio 6010

Отзывы:

Бренды по названию

Популярные бренды