Ricoh Aficio 220 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 164

Ricoh Aficio 220 Скачать руководство пользователя страница 6

ii

R

CAUTION:

•

Protect the equipment from dampness or wet weather, such as rain, snow,
and so on.

•

Unplug the power cord from the wall outlet before you move the equipment.
While moving the equipment, you should take care that the power cord will
not be damaged under the equipment.

•

When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).

•

Do not allow paper clips, staples, or other small metallic objects to fall inside
the equipment.

•

Keep toner (used or unused) and toner bottle out of the reach of children.

•

For environmental reasons, do not dispose of the equipment or expended
supply's wastes at household waste collection point. Disposal can take
place at our authorized dealer or at appropriate collection sites.

•

The inside of the machine could be very hot. Do not touch the parts with a
label indicating the “hot surface”. Otherwise it could cause a personal burn.

•

Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you only use the expendable supplies availa-
ble at an authorized dealer.

«
...
4
5
6
7
8
...
»

Содержание Aficio 220





































































































































































Отзывы:

Нет отзывов