Ricoh Aficio 220 Скачать руководство пользователя страница 5

Страница: 5 / 164

Safety Information

When using your machine, the following safety precautions should be always
followed.

Safety During Operation

In this manual, the following important symbols are used:

WARNING:

Ignoring this warning could cause serious injury or even death.

CAUTION:

Ignoring this caution could cause injury or damage to property.

•

Connect the power cord directly into a wall outlet and never use an ex-
tension cord.

•

Disconnect the power plug (by pulling the plug, not the cable) if the
power cable or plug becomes frayed or otherwise damaged.

•

To avoid hazardous electric shock or laser radiation exposure, do not
remove any covers or screws other than those specified in this manu-
al.

•

Turn off the power and disconnect the power plug (by pulling the plug,
not the cable) if any of the following conditions exists:

•

You spill something into the equipment.

•

You suspect that your equipment needs service or repair.

•

Your equipment's cover has been damaged.

•

Do not incinerate spilled toner or used toner. Toner dust might ignite
when exposed to an open flame.

•

Disposal can take place at our authorized dealer or at appropriate col-
lection sites.

•

Dispose of the used toner bottle in accordance with the local regula-
tion.

Содержание Aficio 220





































































































































































Результаты поиска

Содержание Aficio 220

Отзывы:

Ricoh Aficio 220, Руководство по эксплуатации, Страница: 5 / 164

Результаты поиска

Содержание Aficio 220

Отзывы: