Ricoh ADF DF7010, Руководство по обслуживанию на месте

Страница: 66 / 72

64
Chapter 7 3 HELP Mode Functions and Operation Procedures
HELP-043
−0.6
+0.3
+0.0
+0.0
1.
2.
3.
4.
Page 2:
● Adjustment.
ADF read width
ADF read length
ADF feed range
ADF trail edge end position
● Operation procedure
(2) ADF Read Adjustment
(2 pages in total
)
1.
Call the HELP mode “H-043”.
2.
Change the screen.
Touch
HELP-043
000.0
000.0
+0.0
5.
6.
7.
Adjust the ADF read.
3.
Adjustment
1. Select and touch the item to be adjusted.
ADF read width
ADF read length
ADF feed range
ADF trial edge end position
2. Enter the value by the NUMERIC keys or change the
value by the PRINT POSITION keys.
● Press the HOME key or PROPERTY key to invert "+"
and "-" of the selected set value.
● Press the C (clear) key to return the selected set value
to the value before change.
3. Press the
X
=
key to store the set value.
4.
Return to the HELP mode.
HELP-043
000.0
000.0
+0.0
5.
6.
7.
+0.0
ADF READ WIDTH(mm)
ADF READ LENGTH(mm)
ADF FEED RANGE(%)
ADF TRAIL EDGE END POSITION (mm)
8.
+0.0
8.
Press the STOP key.
The HELP mode selection display will reappear.
Enter “
043
” by the NUMERIC keys and then press the
PRINT key.
Touch the arrow on the screen lower right once to switch to
Page 2.
ADF READ WIDTH(mm)
ADF READ LENGTH(mm)
ADF FEED RANGE(%)
ADF TRAIL EDGE END POSITION (mm)
ADF READ WIDTH(mm)
ADF READ LENGTH(mm)
ADF FEED RANGE(%)
ADF TRAIL EDGE END POSITION (mm)
→ To exit the HELP mode : Turn the power switch OFF.
→ To access another HELP mode : Enter the desired mode number using the numeric keys.