Ricoh AC016d, Быстрое руководство, Страница: 12 / 16

7
English
Installing the Software
N
OTES
:
• Cancel the “New Hardware Found” window when your computer
boots up.
• Make sure that your machine is plugged in and connected to
your computer’s parallel port or USB port before installing
software . Windows 95 and Windows NT 4.0 do not support the
USB connection.
1
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run and an installation
window appears.
If the installation window does not appear, click Start and
then Run . Type X:\Setup.exe , replacing “ X ” with the
letter of your drive and click OK .
N
OTE
: If your machine is not connected to the computer, the
following window will appear.
• After connecting the machine, click Next .
• If you want to skip the connection status, click Next, and No to
the following screen. Then the installation will start and the test
page will not be printed at the end of the installation.