Ricoh 4430NF, Руководство по эксплуатации

Страница: 37 / 120

31
2. Faxing
Transmission Modes
There are two types of transmission.
❖
Memory Transmission
The fax is stored in memory, and
then transmitted automatically.
This is convenient when you want
to remove originals quickly.
You can send the same fax to more
than one destination in a single op-
eration. This technique is referred
to as Broadcasting.
❖
Immediate Transmission
The machine dials immediately
and transmits the fax while scan-
ning.
This is convenient when you want
to send a fax immediately and
want to check whether you have
successfully connected with the
other party's fax machine.
The fax is not stored in memory.
Important
❒
Make sure that 100% appears on
the display before you turn off the
power. If the power is turned off
for 12 hours or longer, all docu-
ments stored in memory are delet-
ed. As soon as the power is turned
on, the Power Failure Report is
printed to help you identify delet-
ed documents. See p.174 “Power
Failure Report”,
Advanced Features .
Switching between Memory
Transmission and Immediate
Transmission
Press the
{
Memory Trans.
}
key to
switch between Memory Transmis-
sion and Immediate Transmission.
When the indicator of the
{
Memory
Trans.
}
key is not lit, Immediate
Transmission is selected. When the
indicator of the
{
Memory Trans.
}
key is
lit, Memory Transmission is selected.
GDRH240E
Transmitter
(This machine)
Receiver
ZHMS040E
StellaF26_combine_F-GB_FM_forPaper.book Page 31 Tuesday, January 16, 2007 10:08 AM