Richter V&A KNAR-D/F, Руководство по эксплуатации

Страница: 13 / 28

Series Series
KNAR/F, KNARP/F, KNAR-D/F, KNARP-D/F,
Page 13
KNAR-S/F, KNARP-S/F
ASME
9520-082-en Revision 14
TM 9549 Edition 11/2017

Tighten setscrew 904/4 in the coupling 804 .

Tighten sleeve nut 512 on the coupling tight.
Attention: Left-hand thread.

Observe drawing in Section 10.3 and 10.5 .
9.3 Conversion from lever to
actuator

Select the actuator in accordance with the
instructions of the actuator manufacturer.

Remove hand lever 203 .

Remove lever stop 577 and plug.

Check the fits of the coupling 804 , bracket 510
and actuator 850 .

Mount bracket 510 with the opening at right angles
to the direction of flow.

Mount coupling 804 and actuator 850 . While doing
so, observe direction of rotation of the v-control
ball/stem unit.

Observe the actuator position in accordance with
the actuator operating manual.

Tighten setscrew 904/4 in the coupling 804 .

Tighten sleeve nut 512 on the coupling tight.
Attention: Left-hand thread .

Observe drawing in Section 10.3 and 10.5 .
10 Drawings
10.1 Legend
101 main body
102 body end piece
201 ball/stem unit
203 lever
401 seat ring
403 packing bellows
405/1 thrust ring
502 spring gland follower
503 packing gland follower
510 bracket
526 retaining washer
(DN ½“, ¾“, 1“, 1½“, 2", 3", 4")
554/1 washer
554/5 washer
(3”)
557 grounding spring washer
577 lever stop
804 coupling
includes:
512 sleeve nut
904/4 setscrew
980/1 round head grooved pin
850
actuator
901/x hex. screw
902/1 stud screw
904/1 set screw
914/2
hex. socket screw
(2")
918/1
threaded rod
(6", 8")
920/x hex. nut
936/x toothed lock washer