7
MODEL: RR20
NOTE
: If no DAB stations are found after auto scan the unit will
enter the Tune Select Menu. Try changing the location of the radio
and extend or adjust or the antenna. Rotate the dial to select “Full
Scan” or “Manual Scan” and rescan.
• To repeat an Auto Scan press and hold
MENU/SCAN
button until
the display shows “
Scanning ………
” together with a progress bar
that indicates the progress of the scan and the number stations that
have been found so far.
DAB Auto Scan
: A full auto scan will search the entire DAB Band for
all available stations.
3. DAB Manual Tune
As well as Auto Scan, Radio Station Frequencies can be manually
selected. You can manually tune to a particular channel/frequency,
and you will need to know the missing radio station Frequency to
complete a Manual tune.
• Quick press the
MENU/SCAN
button to enter Station scan mode
and then press the dial to confirm, rotate the dial to select “
Manual
tune
” mode and then press to confirm.
• Rotate the dial to cycle through the DAB Channels/Frequencies,
which number from 5A to13F.
• After your desired channel number is selected, press the dial to
enter the current multiplex, it will now display the multiplex and
below you will see the signal strength.
Note:
You will not see any new radio stations or hear anything while
in manual tune. To find the newly tuned station search through the
station list.
