GTR061 Installation Manual:
Rev 3
29
Clearing Remote Controls:
• To delete all paired remote controls, Press and hold the learning button K4 for approximately 8 seconds.
Once the indicator light LRN turns off, all remote controls previously paired will be deleted.
Clearing Remote Controls:
• While the motor housing cover and clear plastic PCB cover are removed,
• Press the learning button K4 on the control board, until the indicator light LRN turns on, then release the
button.
•
While the light is on, press the first button on the remote control twice within 4 seconds, the LRN will
flash repeatedly and then turn off when remote control is paired.
Technical Support:
For support or assistance with installing your gate motor, visit
richmondau.com/gate-motor-support/
Or ring your local Richmond Wheel & Castor Branch
AU:
03 9070 5713
NZ:
0800 61 71 81
International:
+613 9551 2233
Richmond Wheel & Castor Co declines all responsibility for any consequences resulting from improper use
of the product, or use which is different from that expected and specified in the present documentation.
Richmond Wheel & Castor Co declines all responsibility for any consequences resulting from failure to
observe Good Technical Practice when constructing closing structures (door, gates etc.), as well as from
any deformation which might occur during use.
Press and hold the learn button (K4)
until the Learn LED flashes ON.
While the light is on, press the first
button on the remote control twice.
The Learn LED will flash repeatedly and then
turn OFF. when the remote is paired.
