Richmar US 1000 3RD EDITION, Инструкция по эксплуатации

Страница: 11 / 24

11
Steps to Connect the Adapter
1. Insert the DC Plug of the adapter into the DC
receptacle on the main unit. (as the picture).
2. Please hold the main unit tightly, when inserting
the DC plug into the DC. Insert and pull out the
DC plug in correct direction.
3. There are many different adapters (specification
& shape of the plug) used by different countries.
4. Insert the adapter into the power supply
socket. (as the picture) Be sure the power voltage
is appropriate. Use only the adapter provided by
the manufacturer.
ATTENTION:
Please use the original adapter. The user can not re-
assemble or change the specification of the adapter. Personal injury
or damage to the unit may be caused if you DO NOT follow the
above instructions and will void warranty.
Apply Transmission Gel
Wash the area to be treated so that it is free of
oil and dirt. Apply a generous layer of ultrasound
transmission gel on the treatment area. The
gel acts as a coupling substance and ensures
effectiveness. The area treated should be two
times the diameter of the sound head.
Turning On the Device
Press On/Off button to turn on the power, the
device will beep, and the LED will light up green.
Adjust Output Intensity
To adjust the output intensity, push On/Off button
slightly.
•
LED: Green, the vibrating is in Low level;
•
LED: Orange, the vibrating is in Medium level;
• LED: Red, the vibrating is in High level.
When adjusting the intensity each time, a beep
will sound. To return output to low level, press On/
Off button again. When the device is working, the
device will beep twice every five minutes.
5. INSTRUCTIONS FOR USE
ON/OFF
L.M.H
ON/OFF
L.M.H
ON/OFF
L.M.H
ON/OFF
L.M.H
LOW MED
HI