Richiger EA 910, Руководство оператора

Страница: 17 / 76

4) Pull the third lever “C” up
to rotate bag pick-up roller
forward until the sharpened
studs that hold the bag reach
topmost position (Figs. 15 & 16).
If roller does not turn initially,
hold lever up for a few more
seconds until clutch engages
automatically. Then move lever
back to neutral.
2) Turn the cutter blade
around so that its cutting edge
faces outward. The blade will
cut open the bag as the roller
pulls it in.
(Fig. 13).
3) Drive the tractor/unloader pair in reverse
and align with the bag opening as straight and dead
center as possible.
Back up the unloader into the bag until the sweep
augers come lightly in contact with the grain, but do
not shove or attempt to wedge the sweep
augers forcefully into the mass of grain.
Be careful that the wheels are not treading on any
part of the bag (Fig. 14).
Fig.13
Fig.14
Fig.16 Fig.15
10