2
INSTRUCTION MANUAL
Important information you should know:
The images in this manual are illustrative and are
meant to demonstrate the correct operation of your
product, there may be small changes in relation to the
images.
ALWAYS USE PROPER PROTECTIVE
EQUIPMENTS
TO
OPERATE
THIS
MACHINE.
Important Safety Instructions
WARNING: When working with machines,
always follow the safety
precautions to reduce
the risk of fire, electric shock and injury, including the
following:
READ ALL INSTRUCTIONS
CAUTION:
WHEN DOING MAINTENANCE,
REPLACE ONLY WITH IDENTICAL PARTS.
Repair or replace damaged wiring.
SAFETY INSTRUCTIONS
FOR ALL EQUIPMENTS
Keep a clean work surface
. Cluttered areas and work
surfaces are invite accidents.
Do not use the Edgebander in hazardous
environments
. Do not use machine in damp or wet
locations or exposed to rain. Keep well-lit work area.
Keep children away
. Visitors should be kept safe
distance from work area.
Make the workplace childproof
making use of
padlocks, master keys or removing the ignition key.
Do not force tool
. It will perform the job better and
safer for the intended use.
Use appropriate equipment
. Do not wear loose
clothing, gloves, chains, rings, bracelets or other
accessories that could become caught in moving
parts.
It is recommended
wearing shoes with non-slip soles.
Use protection for the hair in order to hold them.
Always wear safety glasses
. Also use hearing
protection.
Do not overreach on the equipment
. Maintain
balance and feet in comfortable position at all times.
Keep all tools in order
. Keep tools sharp and clean
for better and safer performance. Follow the
instructions for lubricating and changing accessories.
Unplug the machine
before servicing or changing
accessories such as scissors, cutters etc.
Reduce the risk of unintentional starting
. Ensure
that the switch is in the "OFF" position (off) before
connecting the wire to the plug.
Use recommended accessories.
See the instruction
manual to check recommended accessories. Improper
use of accessories may cause risk of injury to persons.
Never step on the machine.
May occur serious
accident if the machine is dented or if parts are
accidentally touched.
Check for damaged parts
. Before continuing the use
of Edgebander, a guard or other part that is damaged
should be examined carefully to determine its proper
operation and perform its function properly. Check the
alignment of moving parts, breakage of parts,
mounting and any other condition that may affect its
operation. Any part that is damaged should be
repaired or replaced immediately. Do not use the tool if
the switch does not turn on or off.
Never leave a running tool unattended
. Turn off the
ignition key.
The engine of this machine can emit sparks
, and
explode flammable gases.
Extension cables
. Make sure your extension cord is
in good condition. When using an extension, be sure
of their ability to transmit the electrical current used by
your product. An undersized cord will cause drop in
voltage resulting in loss of power and overheating. The
following table shows the correct size to be used
depending on the cable diameter and amperage rate.
If in doubt, use a cable with a higher level of capacity.
IMPORTANT: Do not use an extension cord with
length above 20 meters
Cable 2 wires
Cabo 3 wires
Ø (mm
2
)
Amperage
Ø (mm
2
)
Amperage
0,5
9
0,5
8
1,0
13
1,0
12
1,5
16,5
1,5
15
2,5
23
2,5
20
