Rice Lake Summit SD-1150-WP, Руководство по эксплуатации

Страница: 13 / 22

Operation
© Rice Lake Weighing Systems ● All Rights Reserved 9
3.2 Weighing
Use the following steps to weigh.
1. Press to turn on the scale. 0.0 appears on the display along with the ZERO annunciator.
2. Place the patient on the scale. The patient’s weight is displayed, the LOCK annunciator is on and the indicator beeps
to indicate the end of the weighing process.
3. Press to change the display from lb to kg and vice-versa.
4. Press and hold until OFF displays to turn off the scale.
3.3 Hold/Release Function
Use the following steps to use the Hold/Release function.
1. Press to turn on the scale. 0.0 prompts along with ZERO on the display.
2. Press once the patient’s weight stabilizes. The patient’s weight and the HOLD and LOCK annunciators remain
on the display when the patient is off the scale.
3. Press again to return the scale to zero.
Pressing will not work while using Hold/Release function.
Pressing prior to the patient getting on the scale will also hold the weight display.
3.4 Preset Tare
Use the following steps for the Preset Tare function prior to patient weighing if additional items are being used by the patient.
1. Press to turn on the scale. 0.0 appears on the display along with the ZERO annunciator.
2. Place additional item(s) on the scale.
3. Press until the display returns to 0.0 and NET annunciator appears on the display.
4. Remove additional item(s) from the scale. The weight displays with a negative symbol to the left of it.
Not removing the additional item(s) prior to patient weighing will also work.
5. Position the patient and additional item(s) on the scale. The display identifies the patient weight. The NET annunciator
is still active. The weight of the additional item(s) remains stored in memory for the duration of this weigh in.
6. To cancel the tare weight, remove patient from the scale and press until NET disappears from the display and
the display turns back to 0.0 and GROSS appears.
Tare weight is also canceled when the scale is turned off.
3.5 Toggle Tare
Use the following steps to use the Toggle Tare function when the additional item to be weighed is known.
1. Press when the scale is empty and 0.0 displays. The default values prompts while 0.0 is flashing on the display
(default is programmed to be 33.0 lb/15.0 kg).
2. Use and to adjust the value. Press to start the tare function. The NET annunciator turns on instead
of the GROSS annunciator.
Note
Note
TARE
T
Note
TARE
T
Note
TARE
T
ENTER