Rice Lake SCT-1000ETHERNET, Руководство по эксплуатации

Страница: 9 / 28

Setup
© Rice Lake Weighing Systems ● All Rights Reserved 5
2.2.2 Wi-Fi Module
The SCT-2200 Wi-Fi can be configured through a web browser using eitherWi-Fi capability or the external Ethernet cabling with
an external RJ-45 connector. We recommend using a network surge suppressor (PN 72682) wired through a cord grip with the
RJ-45 socket left outside of the enclosure.
Figure 2-3. SCT-2200 Wi-Fi Electrical Diagram
2.3 Configuring PC to communicate with Module
2.3.1 Setting the IP address for Ethernet connections
Both the SCT-2200 Wi-Fi and the SCT-1000 Ethernet module have Ethernet capability and will be automatically recognized
when hardwired into a network.
• The default IP address of the SCT-2200 Wi-Fi is 192.168.16.254.
• The default IP address of the SCT-1000 Ethernet is 192.168.16.205.
The computer Ethernet port must belong to the same class of network for the module to be recognized on the network (in this
case, the network must have an IP address of the type 192.168.16.xxx). To modify the IP address in Windows 10 follow these
steps:
1. From the Start menu, select Settings. See step 1 in Figure 2-4 .
2. In Windows Settings, select Network and Internet. See step 2 in Figure 2-4 .
3. In Network and Internet, select Ethernet, then select Change Adapter Options. See step 3 in Figure 2-4 ..
Figure 2-4. Setting IP Address
4. In the Network Connections window, double click Ethernet. See Figure 2-5 .
Figure 2-5. Network Connections
RJ45 B (-) 5
RS485 A (+) 4
B (-)
A (+)
+
-
12/24 Vdc
EARTH
GND
+Vdc
TXD
RXD
GND
N.C.
WAN
SMA WIFI
RS485
RS232
POWER
LAN
1
8
1
8
TX RX PWR
RJ45 B (-) 5
RS485 A (+) 4
120
:
1
2
3
4
6
7
8
9
5
1. 2.
3