SCT-2200 Wi-Fi Module Parameters
© Rice Lake Weighing Systems
●
All Rights Reserved
13
4.2 NetMode
The module can be configured into four modes within the NetMode menu of the Serial2Net Settings. Click on the NetMode
dropdown and the following options will display.
• Default
• ETH-SERIAL - Serial to Ethernet
• Wi-Fi(CLIENT)-SERIAL - Serial to Wi-Fi CLIENT
• Wi-Fi(AP)-SERIAL - Serial to Wi-Fi AP (access point)
Figure 4-3. NetMode Menu
4.2.1 Default Mode
• Wi-Fi is enabled in AP mode
• ETH1 is enabled as WAN
• ETH2 is enabled as LAN
• Two-way data communication is possible between COM1 and the network
• All Wi-Fi encryption methods are supported
• Wi-Fi device can connect with the module and become the device under Wi-Fi LAN
• WAN default IP is dynamic
• LAN and Wi-Fi are enabled by the default DHCP server
Figure 4-4. Default Mode Model
Scale
Module
SCT-2200 Wi-
COM1
Wi-Fi
AP
ETH2
ETH1
SERIAL
LAN
WAN
Wi-Fi CLIENT
(PHONE, PAD)
