Rice Lake LaserLight Series, Руководство по установке, Страница: 29 / 46

Options
© Rice Lake Weighing Systems ● All Rights Reserved 25
4.2 Temperature
If the temperature option (PN 43412) is added after initial installation, see Section 2.0 on page 4 for enclosure disassembly
instructions.
To install the this option:
1. Remove the plug from the option hole and insert the temperature probe.
2. Attach temperature probe wiring to J4 on the CPU board.
4.3 Visor Installation
An optional visor can be installed on the LaserLight 7-segment remote display and the 8- or 12-character matrix display.
See Figure 4-2 for the remote display with the optional visor installed.
Figure 4-2. LaserLight Remote Display With Optional Visor Installed (7-Segment Display)
Set the visor (PN 75854 - 4" model and the 8-character matrix display or PN 75855 - 6" model and the 12-character matrix
display) on top of the remote display and attach the visor using screws and plastic washers provided.
4.4 Pole Mount Kit
The LaserLight remote display can easily be mounted on a pole or steel I-beam using the optional pole mounting kit
(PN 75856 - 4", PN 77775 - 6", PN 85343 - 8-character, PN 85344 - 12-character). Use the following steps to install the pole
mount option:
1. Use the enclosed 3/8" cap screws, washers and lock nuts from the parts kit to attach the clinching pole brackets to the
pole mounting weldment.
The 6" LaserLight remote display uses four brackets (PN 76999) and the 4", 8- and 12-character display uses two.
2. Use the enclosed 3/8-16NC bolt (PN 14747), to attach the clinching pole brackets together using washers and lock
nuts. Tighten as necessary.
3. Align the back of the LaserLight remote display to the pole mount weldment and ensure the holes line up.
4. Use enclosed 1/4" cap screws, washers and nuts to attach the remote display to the mounting weldment.
Item No. Part No. Description
2 77000 Weldment, Pole Mounting (4" Model - 1)
2 76998 Weldment, Pole Mounting (6" Model - 1)
8 14635 Nut, Lock 1/4-20NC Hex (4)
3 14747 Bolt, 3/8-16NCx2-3/4 Hex (4" Model - 1) (6" Model - 2)
10 14955 Screw, Cap 1/4-20NCx1/2 (4)
7 15019 Screw, Cap 3/8-16NCx1 HEX (4" Model - 2) (6" Model - 4)
9 15145 Washer, Plain 3/8 Type A (8)
4 21938 Washer, Plain Type A (4" Model - 4) (6" Model - 8)
5 22072 Nut, Lock 3/8-16NC Hex (4" Model - 3) (6" Model - 6)
6 76999 Bracket, Clinching Pole (4" Model -2) (6" Model - 4)
11 77001 Screw, Mach 3/8-16NC (4" Model - 3) (6" Model - 6)
NOTE: See Figure 4-3 on page 26 for the Part Kit Illustration.
Table 4-1. Parts Kit Contents (4" and 6" Models)
Note