Rice Lake Laser-LT-100, Техническое руководство

Страница: 7 / 19

Introduction
© Rice Lake Weighing Systems ● All Rights Reserved 3
1.3 Product Displays
The front panel of the LaserLT-60 Remote Display has a six digit display that is 2.4 " high, six LED annunciators and five
function keys.
The front panel of the LaserLT-100 Remote Display has a six digit display that is 3.9 " high, six LED annunciators and five
function keys.
Figure 1-1. LaserLT-60 Remote Display Front Panel
The following table describes the function keys:
The following table describes the function LEDs:
Key Description
Steps forward, or moves right in the menu or increments an entry value;
Used to adjust the display intensity; When
is pressed by default KZERO<CR> is transmitted;
To modify display intensity press and hold until

(Lint 01) displays then press again to increment the display
intensity from

–

(Lint 01 – Lint 05)
Steps backward in the menu or decrements, decreases, an entry value;
When
is pressed by default KTARE<CR> is transmitted
Returns to the default level of the menu or scrolls in entry mode;
When
is pressed by default KGROSSNET<CR> is transmitted
Enter a parameter step or confirm entry of a value; When is pressed by default KPRINT<CR> is transmitted
Press to turn on the unit; Hold until
OFF
displays to put the unit into standby mode (‘
,
’ displays to indicate unit is in standby);
Exits a parameter step when pressed in a menu
Table 1-2. Front Panel Key Descriptions
Annunciator Description
>0< Illuminates when the weighing system is within ±1/4 division of zero
~ Illuminates when the weight is unstable
Net Illuminates when a tare is established, measuring for net weight
W1 Indicates the activation of the first output (Sp1) or Primary (unit 1) if set
W2 Indicates the activation of the second output (Sp2) or Secondary (unit 2) if set
Func Illuminates:
• When the specification function of the instrument is active (set in
F.ModE

FUnCt
parameter)
• When a key is pressed
Turns off:
• When the specification function of the instrument is disabled with an active function
• Blinking indicates instrument function is active for five seconds
Table 1-3. LED Annunciator Descriptions