Rice Lake Laser-LT-100, Техническое руководство

Страница: 15 / 19

LaserLT-60 and LaserLT-100 Remote Displays
10 Visit our website www.RiceLake.com
3.4 Semi Auto Learn Using rEPE.in
rEPE.in
is a semi-automatic mode to establish the start and end positions of the weight value.
rEPE.in
has no parameters
and does not read annunciators for units, mode, or status. This parameter is in the
PCMode
.
The polarity sign is to be included as part of the start position. The total weight length can be more than six characters. If a
negative value is present, the negative sign will be placed in the character to the left of the displayed value, as long as the value
is not more than five digits.
If the weight value includes leading zeros they will be displayed. Navigate parameters for the configuration of the weight
indicator by using the display keys, see Table 1-2 on page 3 for navigation assistance:
1.
Con.Ai
displays, press .
2. The detected baud rate and the milliseconds to read the string displays, press .
3.
Verify
and the first recognized character displays, navigate parameter using the five function keys, press .
4.
Set?
displays, press .
5.
Wait....Start
displays, wait for the process to finish.
6. The start of the string will display, navigate parameter using the five function keys, press .
7.
End
displays the end of the string, navigate parameter using the five function keys, press .
Baud, bits, address (for RS-485) and timeout can be configured or the learn mode can be saved.
3.5 Function Mode Menu
The
F.modE
( Function Mode ) menu changes parameter functions of the device:
Figure 3-8. Function Mode Navigation
Menu Parameter Description
F.modE
(Function Mode)
FunCt
Function – Access to function parameter; Not applicable
ir.ConF
Not applicable
L.int
Light Intensity – Display back light intensity selection that defaults on power on;
Settings:
Lint00
,
Lint01
,
Lint02
,
Lint03
,
Lint04
,
Lint05
FunCt
(Function)
rEPE
REPE – Single scale repeater; Reception of the RS-485 address, see
PC SEL
in Table 3-2 on page 6
Master
Not applicable
Table 3-6. Function Mode Parameter Definitions
F.modE
FunCT L.int ir.Conf
rEPE MAster
SEtUP
diAG