Rice Lake Challenger 3 MSI-3460, Техническое руководство

Страница: 13 / 46

Setup
© Rice Lake Weighing Systems ● All Rights Reserved 9
4.0 Setup
The following keys can be used when navigating through the menus while setting up the MSI-3460.
• exits setup without saving changes;

displays briefly and unit enters Weigh mode
• functions as the
Enter/Select
key
• functions as the
Scroll
key
• To enter a decimal point, press while the digit is blinking
• Press to save and go back one level; Press it again to return to Weigh mode,

displays briefly
• To change/correct a digit, press to step back one digit and use and to change the digit
4.1 Setup Menu
To enter into the MSI-3460 Setup menu, press and simultaneously.
Parameters Choices Description



Function User Key 1 – User definable key that can be programmed to one of several functions
Function User Key 2 – User definable key that can be programmed to one of several functions; Available if an RF remote is used

Test Display – Section 4.2.1 on page 10

Total – Section 4.2.2 on page 11

View Total – Function always available on the RF Remote ( Section 4.2.3 on page 11 )

Net/Gross – Function always available on the RF Remote ( Section 4.2.4 on page 11 )

Peak Hold – Section 4.2.5 on page 11 ; Function not available or non-functional in OIML R76 or NTEP HB44 modes

Units – See Section 4.2.6 on page 11 ; Function not available or non-functional in OIML R76 & 1Unit modes

Print – Section 4.2.7 on page 11
 




Auto Off Time – Prolongs the battery life of the scale by turning power off after the set time (in minutes) that the scale is not in
use ( Section 4.3 on page 12 )
 



Sleep – Time (in minutes) before unit will enter sleep mode ( Section 4.4 on page 12 )
 




LED Display Intensity – Used to set the display brightness ( Section 4.5 on page 13 )
 


Setpoint 1 to 8 – Used for warnings or process control ( Section 4.6 on page 13 )
 




Total Mode – Accumulation of multiple weighments ( Section 4.7 on page 14 )
 


Weight Filter – Allows the scale to adjust to situations where there may be movement ( Section 4.8 on page 15 )
 

Weight Units – Toggle units between pounds and kilograms;
Function not available or non-functional in OIML R76 & 1Unit modes ( Section 4.9 on page 16 )
 

Battery Life – Sets the options for standard or extended battery life ( Section 4.10 on page 16 )
Table 4-1. Setup Menu Parameters
POWER
TARE
USER
F
POWER
ZERO
ZERO TARE
USER
F
POWER
USER
F