Rice Lake CellScale MSI-9850, Руководство оператора

Страница: 8 / 18

4 Ethernet 802.11b
2.3 802.11b Connection
The 802.11b interface defaults to an unsecured connection. This allows the device to connect to any unsecured
network for configuration. Once connected to an unsecured network, any secure network settings can be applied and
the unit will operate on the secure network from that point on.
Information on configuring the wireless security settings can be found in the web interface, wireless settings. See
Section 2.6.1 on page 8.
2.4 Configuring Network Settings
Network settings can be configured from the
Scale Discovery Utility
, or by opening a web page and pointing it to the
scale device address. The network configuration is specific to every network. Please consult the network
administrator for this information.
2.5 Scale Discovery Utility
Note
Scale Discovery Utility (found on the Rice Lake website) may need to be added to the security on the
computer for the Scale Discovery Utility to run. See Section 3.2 on page 10.
The
Scale Discovery Utility
can be accessed from the Rice Lake website and requires Java 6.0 or greater to run. It uses
UDP port 2362 and a multi-cast IP address of 224.0.5.128. These must be enabled on the firewall for the
Scale
Discovery Utility
to work. They are typically enabled by default.
The program is loaded from the web page via Java Web Start technology. This ensures whenever the program is
started, the latest version is being used.
1. Open the
Scale Discovery Utility
.
Figure 2-2. Scale Discovery Utility
2. Select
Scan Network
for the scale. The scan should take about five seconds and when complete, a list of the
scales found is displayed.
Note
Allow the network interface a minute or two to boot up and acquire an address once the scale is first turned on.