Rice Lake 250-10-2, Техническое руководство

Страница: 7 / 28

Assembly
© Rice Lake Weighing Systems ● All Rights Reserved 3
2.0 Assembly
2.1 Unpacking Scale
A minimum of two people should transport, unpack and assemble the scale for their own personal safety and ensure the
integrity of the scale. Place the unopened box in an open area that has ample room for unpacking the scale. Use caution while
removing packaging and unpacking the scale. After unpacking, visually inspect the 250-10-2 bariatric handrail scale to ensure
all components are included and undamaged. If parts were damaged in shipment, notify Rice Lake Weighing Systems and the
shipper immediately.
Parts contained in the shipping box include:
• The scale
• This manual
• 6 mm Allen key
• Six AA non-rechargeable batteries
2.1.1 Repackaging
Retain the packaging for use in the event that the scale must be returned or moved. The product must be properly packed with
sufficient packing materials. Whenever possible, use the original carton and packing materials when shipping the scale back.
Damage caused by improper packaging is not covered by the warranty.
2.2 Scale Setup
Use the following steps to set up the bariatric handrail scale.
1. Move the box into the area where the weighing process will occur. It’s recommended to place the scale on a hard, level
surface for the most accurate weighments. Thin carpeting is fine, but not recommended.
2. Using two people, remove the scale out of the packaging material that it came in by lifting the scale out of the box by
the scale base.
Do not lift the scale out of the box by its handle as this can cause the hinges to break.
3. Gently place the scale platform down to the floor.
4. Loosen the handles using the supplied Allen key, unfold handles and set upright.
Figure 2-1. Set up Sides to a Vertical Position
IMPORTANT
IMPORTANT
Lift handles up