Rice Lake 150-10-6, Техническое руководство

Страница: 9 / 30

Assembly
© Rice Lake Weighing Systems ● All Rights Reserved 5
2.2.2 Attach Second Column to First Column
Once the wheel assembly is attached, finish the scale assembly using the following instructions.
Ensure that the cable is extending through the top of the lower column so that it can be plugged into the second
(upper) column.
1. Plug the cable from the lower column into the upper column.
Figure 2-5. Extend Cable Through Scale Column
2. Once the cable is connected, place the upper column onto the lower column, aligning the screw holes. Ensure the
cable does not get pinched.
Figure 2-6. Insert Upper Column into Lower Column
3. Secure with two screws using a Phillips head screwdriver.
2.3 Inserting Batteries
The six AA batteries that come with the scale offer an average of 25 hours of continuous use.
To install the batteries:
1. Open the battery chamber cover by loosening the thumb screw.
2. Insert batteries.
Figure 2-7. Batteries in Battery Chamber
3. Close the battery chamber cover.
Note
Plug connector into
upper column
Make sure that screw
holes are lined up