Rice Lake 150-10-6, Техническое руководство

Страница: 7 / 30

Assembly
© Rice Lake Weighing Systems ● All Rights Reserved 3
2.0 Assembly
2.1 Unpacking
Place the carton on a hard, level surface for unpacking, preferably in the area where it will be used.
Parts contained in the shipping box include:
• Scale (the base and attached column)
• This manual
• White box labeled Parts Inside which contains the following:
Wheels (2)
Wheel hinge (1)
Pan head screws (8)
AA batteries (6)
2.1.1 Repacking Scale
All component parts have been wrapped in plastic. Retain the packaging for use in the event that the scale must be returned or
moved. It must be properly packed with sufficient packing materials. Whenever possible, use the original carton when shipping
the scale back.
Damage caused by improper packaging is not covered by the warranty.
2.2 Scale Assembly
Use the following steps to set up the scale.
A Phillips head screwdriver will be needed for installation.
1. Place the scale on a hard, level surface for the most accurate weighments in an area where the weighing process will
occur.
2. Carefully lift the scale out of the packaging material; lifting by the scale base.
The scale base and scale column are connected by a cable and requires great care when removing from the box
so that the cabling does not get damaged.
Figure 2-1. Cabling Connecting the Scale Platform and Scale Column
3. Gently thread the excess cable through the top of the scale column to eliminate any excess cable at the bottom of the
column. This will eliminate the chance of pinching the cable as the column is being connected to the scale base.
IMPORTANT
Note
IMPORTANT