Rice Lake 1280 Enterprise Series, Инструкции по эксплуатации

Страница: 18 / 24

Recipe ID: 1
Recipe Name: Fall Blend
Ingredient Target Actual
---------------------------------
Corn 200 lb 192 lb
Winter Wheat 300 lb 323 lb
Chicory 222 lb 318 lb
Total 722 lb 833 lb
Printed @ 09:36AM 09/15/2014
14 1280 Enterprise Series
Figure 1-10. Recipe Batching Printed Ticket Example
Application Setup and Configuration
The
Setup Menu
softkey is password-protected and offers access to the following:
• Display program name and version
• Display a weight widget
Table 1-8. Recipe Batching Application Setup and Configuration
Parameter Default Softkey Description
System Password “” Setup Password Allows an operator to change the password that is required for entry
into the Setup Menu. If the password is set to nothing, the system
will not prompt for a password when the
Setup Menu softkey is
pressed.
Add/Edit Ingredients - Database Setup
-> Add/Edit
Ingredients Allows an operator to add/edit ingredients from the ingredient
database table.
Delete Ingredient - Database Setup
-> Delete Ingredients Allows an operator to delete ingredients from the ingredient
database table.
Add/Edit Recipes - Database Setup
-> Add/Edit Recipes Allows an operator to add/edit recipes from the recipe database
table.
Delete Recipe - Database Setup
-> Delete Recipes Allows an operator to delete recipes from the recipe database table.
Empty Weight 5.0 lb Empty Weight Minimum amount of weight to recognize the scale is empty.
Discharge Time 3.0 Sec Discharge Time Length of time the discharge output remains on after reaching the
empty weight.
Digital I/O Testing - More-> IO Test Screen Allows an operator to turn on/off digital outputs.
1.11.4 Truck In/Out Application
The 1280 truck in/out software application is included with the 1280 standard firmware.
When the traffic light turns green, the truck can pull onto the scale for a transaction. The traffic light will turn red
when the threshold weight is exceeded. The softkeys
Weigh In
,
Weigh Out
,
Truck Register
and
Toggle Light
(requires
Stop and Go Laserlight, sold separately) display on the indicator.
Table 1-9. LaserLight Output
Slot 0 Output
Bit 1 Green
Bit 2 Red