Riccar R25D, Руководство пользователя

Страница: 10 / 76

8
ASSEMBLING THE VACUUM
Attaching the Handle to the Vacuum
NOTE:
Do not plug in the vacuum until
it is completely assembled.
The vacuum cleaner and the handle are
packed separately and require assembly.
• Remove the handle screw located
on the back of the vacuum (Fig. 1).
Insert the handle downward into the
body of the vacuum. Insert screw
and tighten.
• Thread the cord through the two
cord guides on the back of the
vacuum (Fig. 2).
Model R25S only.
• Secure the cord under the cord
guide above upper cord hook (Fig. 3).
• Open the bag compartment cover by
pressing the bag compartment button
on the back of the vacuum to ensure a
vacuum bag is in place.
Unwinding the Power Cord
• The Quick Release Upper Cord Hook
rotates to allow for quick access to the
power cord. Turn the upper cord hook
downward and you can quickly drop
the power cord to the floor without
unwinding it from the cord hooks (Fig. 4).
• Your vacuum is now ready for use.
Storing the Vacuum
• When storing the vacuum cleaner, turn
the Quick Release Upper Cord Hook
to the upright position and wrap the
power cord around the upper cord
storage hook (Fig. 4) and the spring-
activated lower cord hook (Fig. 5).
Fasten the plug to the wrapped cord
using the channel on the plug.
Fig. 2
Fig. 1
Fig. 5
Fig. 4
Fig. 3