Page
28
/
41
VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that product is disconnected form
its power source.
6.1- Maintenance
a) Clean plastic parts with a soft clean cloth.
Do not use aggressive cleansers (solvents or abrasive cleansers), or an abrasive sponge.
Do not put or immerse product in water or any other liquid.
Clean ventilation holes with a soft brush.
b) It is advised to periodically clean the interior of the product by directing compressed air through
the ventilation holes: this operation will guarantee to the engine a good ventilation and will allow
him to function correctly longer.
This cleaning operation is especially recommended for works on marble, stone and brick.
c) Lubrication of the gears
Every 500 hours, lubricate the gear box by adding lubricant evenly on the heads.
d) Replacement of the brushes
When replacing the brushes, it is useful to rectify the collector so as to ensure a perfect
commutation and to prolong the life of the engine. This operation must be carried out by an
authorized service.
6.2- Storage
Product must be stored in a dry location. Always lock up product and keep out of reach of children
6.3- Disposal
- Do not dispose the product with household garbage. Do not throw into the environment.
- Dispose of the product in a collection centre for waste of electrical and electronic equipment, or a
waste drop-off centre; or seek advice from your local municipality.
- Disposal of the product, accessories and packaging should be carried out according to local
regulations governing environment protection.
