Page
25
/
41
IV. GETTING STARTED
Before any intervention on product, ensure that product is disconnected form
its power source.
4.1- Unpacking
- Remove product from its packaging.
- Check that tool and accessories are not damage
The set includes:
1 angle grinder
1 auxiliary handle
1 pin spanner
1 protective guard for grinding operations
4.2- Auxiliary handle assembly (Fig.3)
For user’s own safety, it is essential to use the side handle, which must be
assembled as follows:
- Make sure that tool is unplugged.
- The side handle can be fitted to either side of the machine to suit the
operator.
- Insert handle in your preferred position and then firmly screw it
Fig.3
4.3- Protective guard
4.3.1- Présentation (Fig.4)
The angle grinder is delivered with a protective guard for
sanding/grinding operations.
4.3.2- Protective guard assembly
- Make sure that tool is unplugged.
- Remove the flange and flange nut.
- Slightly unscrew the screw on protective guard clamping collar.
Fig.4
- Align the lug on clamping collar with the notch on angle grinder collar (Fig.5a).
- Press guard down and rotate it (Fig.5b) to required working position (Fig.5c).
Note: Adjust the protective guard so as to prevent the projection of sparks or dust towards the user.
- Tighten screw on protective guard clamping collar.
- Make sure that the protective guard is correctly assembled and that screw is tightly fitted.
- The protective guard must always be fitted during operation.
Fig.5
