Page
28
/
38
and any other condition that may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power tool
for operations different from those intended could result in a hazardous situation.
5) Service
a)
Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
b)
Have your tool repaired by a qualified person. Any protective guard or other part that is
damaged should be properly repaired or replaced by an authorized service centre unless otherwise
indicated in this instruction manual.
This electric tool complies with the relevant safety rules. Repairs should only be carried out by
qualified persons using original spare parts; otherwise this may result in considerable danger to the
user. The use of unauthorized parts or failure to follow the maintenance instructions may result in
injury or damage.
c)
Maintain tools with care. Keep cutting tools sharp and clean for better and safer performance.
Follow instructions for lubricating and changing accessories. Keep handles dry, clean and free from
oil and grease.
6) Battery tool use and care
a)
Recharge only with the charger specified by the manufacturer
.
A charger that is suitable for
one type of battery pack may create a risk of fire when used with another battery pack.
b)
Use power tools only with specifically designated battery packs. Use of any other battery packs
may create a risk of injury and fire.
c)
When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from one
terminal to another
.
Shorting the battery terminals together may cause burns or a fire.
d)
Under abusive conditions of use, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical
help
.
Liquid ejected from the battery may cause irritation or burns.
e)
Ensure that the switch is in the OFF position before inserting the battery
.
Inserting the
battery into power tools with the switch on invites trouble. Injury hazard.
3.2- Additional safety rules for the pump
- Keep all parts of the body away from the suction inlet.
- Make sure the switch is in the OFF position and battery is removed when clearing jammed material.
A moment of inattention while operating the tool may result in serious personal injury.
- Carry the tool by the handle with the function stopped.
Proper handling of the tool will reduce
possible personal injury.
Hold the tool only by the gripping surfaces (handles).
- Never allow children or people who are not familiar with these instructions to use the tool.
- Avoid accidental starting. Ensure the switch is in the OFF position before inserting the battery.
Keep your hands and fingers away from the switch while inserting the battery.