background image

 

the plug. Do not pull the cable. 
Disconnect tool from its power supply before proceeding to any maintenance, 
cleaning or any intervention on product; before leaving tool unattended or when 
tool is not used for prolonged periods of time. 

 

Do not dispose of this product with household rubbish. 
Dispose of this product in the nearest recycle centre. 
Please contact your local authority or local recycle centre for further information 
for its safe disposal. 

 
3.2- General safety instructions for tools 
 
WARNING Read all safety warnings and all instructions.  

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. 

 
Save all warnings and instructions for future reference. 

The term “power tool” in the warnings refers to your mains operated (corded) power tool. 

 
3.2.1- Work area 

a) Keep work area clean and well lit. Cluttered and dark areas invite accidents. 
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, 
gases or dust. Power tools create sparks which may ignite the dust or fumes. 
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to 
lose control. 
Do not let persons, especially children, not involved in the work touch the tool or its power cord or 
the extension cord and keep them away from the work area. 
Keep the product away from children or from their environment. Never allow children to operate the 
tool. Children should be supervised to ensure that they do not play with the tool. 

 
3.2.2- Electrical safety 

a) Power tool plugs must match the outlet. Never 
modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. 
Unmodified plugs and matching outlets will reduce risk of electric shock. 
b) Avoid body contact with earthed or grounded 
surfaces, such as pipes, radiators, ranges and 
refrigerators. There is an increased risk of electric 
shock if your body is earthed or grounded. 
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the 
risk of electric shock. 
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. 
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase 
the risk of electric shock. 
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a 
cord suitable for outdoor use reduces the risk of electric shock. 
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) 
protected supply. Use of an RCD reduces the risk of electric shock. 

 
3.2.3- Personal safety 

a) Stay alert, watch what you are doing and use common sense when operating a power tool.  
Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A 
moment of inattention while operating power tools may result in serious personal injury. 
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as 
dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will 

Содержание RIBILAND 515186





























































Отзывы: